CONVENTIONAL USE
The pressure filter is a sealed pressure filter system for biological and mechanical filtering of normal pond water with a temperature of +4°C to 35°C. This pressure filter is exclusively intended for private use for cleaning garden ponds with or without pond fish.
Never filter liquids other than water.
SAFETY GUIDELINES
- Electrical installation must be in accordance with the provisions of the domestic.
- Extension cable and adapter (such as socket board) must be suitable for outdoor use (to prevent water splashing).
- If problems or difficulties, please seek help from electrical professionals.
- The electrical data of the supply must correspond to the data on the label.
- Dangerous ultraviolet radiation, the UV rays are harmful to your eyes and skin. Never operate the lamp outside the container.
- If the connecting cable, UV lamp or there is any breakage on the shell, may not run this product.
- If someone in water, cannot run this product.
- In addition to the clear requirements on the manual, cannot open the equipment or other accessories.
- Before any operation on the equipment, should cut off all the power of the equipment.
- Equipment, the interface and the plug is not waterproof, so do not allow the underwater laid or installation.
- Keep dry.
- Need a pump (separately buy) to run this product. The maximum head of the pump shall not exceed the maximum pressure that the product can withstand.
- The internal pressure shall not exceed 0.2 bar.
- Hoses that connection the filter and pump must can withstand the pressure greater than the maximum head of the pump.
- In the product normal work should ensure function switch to "filter". Only when cleaning, allows the switch to "clean".
- Before starting up the filter, check the connected hoses, the clip are correctly.
- If it is a frost day, you have to remove the filter.
- Install the filter where it will not be exposed to direct sunlight.